Start R16 as audio interface by default

Discuss the Zoom HD and R series. Please don't "post and run". Participate in the discussion. Thanks.
Post Reply
gerben
new to this board
new to this board
Posts: 3
Joined: Tue Mar 21, 2017 6:10 pm

Start R16 as audio interface by default

Post by gerben » Wed Mar 29, 2017 4:23 pm

Hi,
Is it possible to start the R16 as an audio interface by default?
Everytime i restart my computer it asks to use the device as audio interface or card reader. While I would like to have it automatically selected as an audio interface.
Thanks!

hoodoo voodoo
senior member
senior member
Posts: 167
Joined: Mon Nov 16, 2009 7:17 pm

Re: Start R16 as audio interface by default

Post by hoodoo voodoo » Wed Mar 29, 2017 8:42 pm

It's just one or 2 pushes of the 'Enter' button on the R16....is that too much of a problem ?

gerben
new to this board
new to this board
Posts: 3
Joined: Tue Mar 21, 2017 6:10 pm

Re: Start R16 as audio interface by default

Post by gerben » Fri Mar 31, 2017 2:27 pm

Hi hoodoo voodoo,
True, I am quite lazy, but I prefer the R16 to be my default system soundcard.
When the pc starts, these two pushes on the enter button are required to produce sounds. If this can be avoided, my familymembers will be grateful.
Maybe someone here on this forum knows how to do this.

Bradzweb
new to this board
new to this board
Posts: 4
Joined: Mon Feb 27, 2017 2:36 pm

Re: Start R16 as audio interface by default

Post by Bradzweb » Thu Apr 27, 2017 9:20 am

I think if you leave the R16 plugged into the USB port but not powered/switched on it should by default be available as an audio interface. I could be wrong though :-)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 3 guests